Flail mower MATENG VGM DYNAMIC200

Model: VGM DYNAMIC-200;
Recommended tractor power (HP): 80-120;
Working width (cm): 200;
Number of hammers (pcs.): 22;
Hammer weight (kg): 1.370;
Blade shaft diameter (mm): 168;
Hydraulic tilt: down to 50°, up to 90°;
Hitch type: Three-point system;
Hitch category: 2 and 3;
Weight (kg): 808;
PTO shaft: Included, 6-spline on both ends;
Condition: New;
Warranty: 12 months;
Manufacturer: "MATENG", China.

MATENG VGM DYNAMIC200 - a robust, heavy-duty series, verge flail mower (mulcher). This mower is designed for professional use, for cutting and mulching tall and untidy grass, as well as small branches on slopes, roadsides, water body banks, and uneven surfaces. The VGM DYNAMIC200 is suitable for tractors from 80 HP (horsepower). The mower is mounted at the rear of the tractor to the three-point hitch system, driven at 540 rpm from the power take-off (PTO) connected by a PTO shaft. The gearbox transmits rotation through 4 V-belts to the cutting shaft on which the cutting hammers are mounted. The blade shaft bearings with housings are conveniently and easily maintained and replaced if necessary. The VGM DYNAMIC200 mower is equipped with strong and heavy "T" shaped hammers, each weighing 1.370 kg! The cutting height is adjusted using the support roller and side support skids. The support roller has two operating positions: the cut grass is thrown behind the roller or the cut grass is thrown in front of the roller (compressed). In VGM DYNAMIC models, the support roller bearings are mounted inside it, which extends their service life. With the help of the hydraulic arm, the position of the mower can be changed in certain directions - horizontally and vertically to the surface being cut (four hydraulic connections at the rear of the tractor are required for connection). The downward tilt angle is up to 50 degrees, and upward up to 90 degrees.

Price including taxes: 4.480,00 Eur including VAT.

www.litechnija.lt