New and unused combine harvester MASSEY FERGUSON IDEAL 7
Engine:
AGCO POWER 9.8 l displacement 7-cylinder
Engine power, kW / HP: 355 / 483
Patented DriveCenter power transmission gearbox
AirSense engine cooler with self-reversing fan
Dual turbochargers
Chassis:
Frame-based combine construction
2-speed hydrostatic MotionShift transmission
Transport speed up to 30 km/h
Cab:
Vision CAB with automatic climate control;
Ergonomic cab with very low noise levels, up to 73 dB
TechTouch Terminal combine control computer with 10.4-inch touchscreen
Threshing - separation system:
Number of rotors: 1 unit
SingleHelix axial threshing-separation system
600 mm diameter RotorFeeder mass feeder
1400 mm mass feeder width
4837 mm threshing-separation rotor length
600 mm rotor diameter
Threshing area 0.83 m²
Separation area 1.44 m²
Total threshing-separation area 2.27 m²
Front-mounted mass feeder-distributor rotates at 70% of rotor speed
Number of threshing-separation beaters | 8 units
Threshing-separation concaves for grain | 4 units
Hydropneumatic concave anti-clogging protection
Number of separation concaves | 6 units
Special flat concave surface, ensures minimal straw damage
Hydraulic reversing of the mass feeding drum and rotor
Grain cleaner:
Unique preparation for cleaning system with mass leveling before the cleaner - IDEAL BALANCE
Brand new CyclonePlus cleaner
Segmented primary shaker board - 1.13 m2
Primary sieve - 1.00 m2
Secondary shaker board under the primary sieve - 1.13 m2
Upper sieve - 3.19 m2
Lower sieve - 2.60 m2
Total sieve area - 6.79 m2
Electrically controlled upper and lower sieves from the cab
ART (Active Return Threshing) independent re-threshing system (adjustable re-threshing system)
Total cleaner area | 9.05 m2
Chaff spreader capable of spreading chaff in 3 directions: with straw into the swath, mixed with straw in the chopper, or to the sides of the combine
Grain tank and unloading:
Grain tank 12500 l capacity - unloading speed 140 l/sec
Hydraulic grain tank opening/closing from the cab
3 tank filling sensors controlling the beacons
Straw chopper:
ShortCut chopper with 112-knife rotor (knives arranged in 8 rows)
Double-sided serrated chopper knives
Long-lasting, non-greasable, maintenance-free chopper rotor bearings
Straw deflector (spreader) with working width and direction controlled from the cab
Technologies:
MF Connect remote combine parameter monitoring system + 5-year free license
Integrated AutoGuide ready automatic steering preparation
TaskDoc job documentation system
HarvestPlus automatic load-based speed control system
Grain loss system for rotors and sieves
Moisture meter and yield monitor (yield mapping)
Additional:
Air compressor with receiver and distributed connectors on the combine
Full LED - all work lights with LED technology
Work lights for rear wheels
AutoGuide SM satellite automatic steering system with free signal
Hydraulically adjustable header tilt angle
Chop-To-Drop chopping/swathing activation from the cab
Front tires 900/60 R38
Rear tires 620/70 R30
7.70 m PowerFlow working width performance-enhancing header
Two electric vertical rapeseed cutters for the PowerFlow header
4WT header trailer (two steered axles)
Warranty period:

5-year factory warranty.
Annual installment – 24600 Eur
Minimum possible down payment 10% of the amount including VAT. More detailed information by phone.